PVKIT 2.0 Solar Manual

SOLAR MANUAL: PVKIT™ 2.0 SOLAR MANUAL: PVKIT™ 2.0

S-5!

2.4

GROUNDING INFO & GROUNDING PATH FOR

PVKIT 2.0

S-5! PVKIT 2.0 with the following roof clamps: S-5-U Mini, S-5-V Mini, S-5-S Mini, S-5-E Mini, S-5-T Mini, S-5-Z Mini, S-5-N

Mini, S-5-U, S-5-V, S-5-S, S-5-E, S-5-T, S-5-Z, S-5-N, S-5-V, S-5-H90

UL Listed PV Modules:

Hanwha Q CELLS

• 60 Cell Modules: NRTL Listed PV Module - Q Cell model Q.PLUS BFR-G4.1, XXX, black frame, where XXX is

270-280.

• 72 Cell Modules: NRTL Listed PV module - Q Cell model Q.PRO L-G4 XXX, 72 cells series, silver frame, where

XXX is 310-320.

Jinko Solar:

• 60 Cell Modules: JKMXXXPP-60, black frame where XXX is 260-345.

• 72 Cell Modules: JKMXXXPP-72, 72 cells series, silver frame where XXX is 260-345.

The following illustrates the system ground path with the green lines:

Please note the Mill Finish 3” Mounting Disc must be utilized to maintain a UL Listed assembly.

Important Notes:

1. Use QIMS UL 2703 Listed grounding lugs

certied for frame thickness of the module being

used and having a 15A fuse rating or less.

2. This ground lug must be utilized in conjunction

with a ground wire to connect adjacent rows of

modules. The ground lug should be secured

to the PV module frame in accordance with

manufacturers installation instructions.

3. In order to maintain a continuous ground path

should a module be removed within a row, it is

necessary to use a ground lug and ground wire

at each end of the row of modules as illustrated

to the right. If a ground lug and ground wire is

not utilized at each end of a row of modules a

temporary ground lug and ground wire must be

used to connect modules at the location of the

removed module.

4. The S-5-PV 3” Mounting Disc (Stainless Steel) is

intended for SINGLE USE ONLY.

5. The intended ground path of black nished

parts is through the Mill Finish 3” Stainless Steel

Mounting Disc only. For non-separately derived

systems, wire positioning must be out of reach of

the black nish components.