Installation Guide

ManualsBrandsS-5 ManualsRackingS-5 ProteaBracket

For Use With the S-5-PV Kit or Top Rail

When utilizing ProteaBracket™ to mount the S-5-PV Kit or top-mounted rail, the

L-ange should be installed with the shorter slotted side (the side without the

square hole) rotated to the horizontal position. Tighten the hinge bolt. Keep the

L-ange straight as you tighten the nut to 225 in. lbs. or 18.75 ft. lbs.

For Use With Side-Mounted Rails for PV

When using a side-mounted rail for PV, ip the L-ange upside down, causing

the shorter slotted side (the side without the square hole) to be ush against the

ProteaBracket base. In this position, the hinge bolt will lock into the square hole on

the L-ange. Tighten the hinge bolt. The L-ange can now serve as an L-foot for

mounting the PV rail. Keep the L-ange straight as you tighten the nut to 225 in. lbs.

or 18.75 ft. lbs.

S-5!® Warning! Please use this product responsibly!

S-5!® Warning! Please use this product responsibly! Products are protected by multiple U.S. and foreign patents. For published data regarding holding strength, fastener torque, patents and trademarks

visit the S-5! website at www.S-5.com.

S-5! aggressively protects its patents, trademarks and copyrights. Version 030513.

ProteaBracket™ Installation Instructions

YOUR S-5! DISTRIBUTOR

SOLIGENT

800-967-6917