Cut Sheet

The S-5-U clamp is our
most popular and versatile
clamp, tting about 85% of
the standing seam proles
in North America.
®
®
®
The right way to attach almost anything to metal roofs!
S-5-U and S-5-U Mini
888-825-3432 | www.S-5.com |
S-5-U Clamp
The S-5-U clamp is by far our most
popular and most versatile clamp.
It ts about 85% of the standing
seam proles manufactured in North
America—including most structural and
architectural proles. It can be used on
vertically oriented seams and, by rotating
the clamp 90 degrees, it can also be used
on most horizontal 2" seam proles.
Its simple design, generous dimensioning,
and multiple hole orientations are what
make the S-5-U clamp so versatile for use
with the S-5!® snow retention products,
such as ColorGard®, as well as with other
heavy-duty applications.
Installation is as simple as setting the
specially patented round-point setscrews
into the clamp, placing the clamp on
the seam, and tightening them to the
specied tension. Then, ax ancillary
items using the bolt provided with the
product. Go to www.S-5.com/tools
for information and tools available for
properly attaching and tensioning S-5!
clamps.
S-5-U Mini Clamp
The S-5-U Mini is a bit shorter than the
S-5-U and has one setscrew rather than
two. The mini is the choice for attaching
all kinds of rooftop accessories: signs,
walkways, satellite dishes, antennas,
rooftop lighting, lightning protection
systems, solar arrays, exhaust stack
bracing, conduit, condensate lines,
mechanical equipment—just about
anything!*
*S-5! mini clamps are not compatible with, and should not
be used with S-5! SnoRail™/SnoFence™ or ColorGard® snow
retention systems.