Cut Sheet

Distributed by
S-5!® Warning! Please use this product responsibly!
Products are protected by multiple U.S. and foreign patents. For published data regarding holding
strength, fastener torque, patents, and trademarks, visit the S-5! website at www.S-5.com.
Copyright 2015, Metal Roof Innovations, Ltd.
S-5! aggressively protects its patents, trademarks, and copyrights. Version 040716.
RibBracket
™
is the perfect attachment solution for specic North American
trapezoidal, exposed-fastened metal roofs! It can be used for almost any
attachment need. No messy sealants to apply. The factory-applied EPDM
rubber gasket weather-proofs and makes installation easy!
RibBracket
™
RibBracket
™
Mini
1.75"
(44.45 mm)
1.18"
(29.97 mm)
0.50"
(12.70 mm)
0.40"
(10.16 mm)
2.49"
(63.25 mm)
2.49"
(63.25 mm)
1.09"
(27.69 mm)
1.09"
(27.69 mm)
0.80"
(20.32 mm)
0.80"
(20.32 mm)
0.20"
(5.08 mm)
0.20"
(5.08 mm)
0.93"
(23.62 mm)
0.92"
(23.37 mm)
0.40" X 1.25"
Slotted Hole
0.40" X 0.70"
Slotted Hole
Factory-Applied
EPDM Rubber Gasket
Factory-Applied
EPDM Rubber Gasket
(4x) 8 mm
Thru Hole
(2x) 8 mm
Thru Hole
0.78"
(19.81 mm)
0.78"
(19.81 mm)
0.58"
(14.73 mm)
0.58"
(14.73 mm)
1.02"
(25.91 mm)
1.03"
(26.16 mm)
50˚
50˚
All pre-punched holes must be used to achieve
tested strength. Fasteners included.
Each RibBracket™ comes with a factory-applied EPDM
rubber gasket on the base. A structural aluminum attachment
bracket, RibBracket is compatible with most common metal
roong materials and many North American trapezoidal
proles. For design assistance, ask your distributor, or visit
www.S-5.com for the independent lab test data that can be
used for load-critical designs and applications. Also, please
visit our website for more information including metallurgical
compatibilities and specications. S-5!® holding strength is
unmatched in the industry.
Example Applications
Example Prole
The above illustration demonstrates the
RibBracket with the S-5-PV Kit attached.