User Manual

TELLO

User Manual

8D Flips

In 8D Flips the aircraft automatically ips in one of eight different directions.

Using 8D Flips

1. Press the power button once to turn the aircraft on. Launch the Tello app and tap to take off.

2. Tap and then select 8D Flips. Read the information prompt and then select

Start

3. Swipe within the box shown in the app. The aircraft will ip in the direction you swipe.

4. Tap in the Tello app any time to exit 8D Flips.

• Ensure there is sufcient space when using 8D Flips. Allow a radius of at least 7 ft (2 m)

horizontally around the aircraft and allow at least 10 ft (3 m) above the aircraft.

• Before using 8D Flips ensure that the Aircraft Status Indicator is periodically blinking green

twice, indicating that the Vision Positioning System is available.

• When using 8D Flips, the distance between you and the aircraft should be at least 3.5 ft (1 m).

• Watch out for potential obstacles in your surrounding area (especially on the rear, left,

and right sides of the aircraft) and stay clear of them to avoid accidents.

• Be prepared to take control of the aircraft by tapping in the Tello app to exit 8D Flips

in case of an emergency.

• Be extra cautious when ying in dark (< 300 lux) or bright (> 10,000 lux) environments.

Throw & Go

Throw & Go lets you launch the aircraft by gently throwing it into the air.

Using Throw & Go

1. Press the power button once to turn the aircraft on.

2. Tap and then select Throw & Go.