User Manual

Flight

Ensure that all ights are carried out indoors or in an open area with no wind. The ight altitude is

limited to 32.8 ft (10 m) and ight distance is limited to 328 ft (100 m). Perform a simple test ight

the rst time you y the aircraft. Refer to the Test Flight section below.

Flight Environment Requirements

1. DO NOT use the aircraft in adverse weather conditions such as rain, snow, fog, wind, smog, hail,

lightning, tornadoes, or hurricanes.

2. Only y at locations where you can keep the aircraft at least 33 ft (10 m) away from obstacles,

people, animals, buildings, public infrastructure, trees, and bodies of water when in ight.

3. DO NOT y the aircraft on a route that has an abrupt change in the ground level (such as from

inside a building to outside), otherwise the positioning function may be disrupted, impacting

ight safety.

4. Aircraft and battery performance is subject to environmental factors such as air density and

temperature. Be very careful when flying 3,281 ft (1,000 m) or more above sea level, since

battery and aircraft performance may be reduced.

5. DO NOT use the aircraft near accidents, re, explosions, oods, tsunamis, avalanches, landslides,

earthquakes, dust, or sandstorms.

6. To avoid interference between your smart device and other wireless equipment, turn off other

wireless equipment while you are ying the aircraft.

7. DO NOT fly in areas where magnetic or radio interference may occur such as close to: Wi-Fi

hotspots, routers, Bluetooth devices, high voltage lines, high voltage power transmission stations,

mobile base stations, or broadcasting towers. Flying in areas where interference may disrupt

communication between the aircraft and the remote control device may adversely affect flight

orientation and location accuracy and may potentially lead to loss of control. Interference may also

lead to video downlink errors.

Compliance with Regulations

To avoid serious injury and property damage, observe local laws and regulations during ight. Refer

to the

Tello Disclaimer and Safety Guidelines

for details.

Test Flight

Perform a simple test ight the rst time you y the aircraft:

1. Place the aircraft in a at area with the Flight Battery facing towards you.

2. Turn on the aircraft.

3. Launch the Tello app and enter the camera view.

4. Use auto takeoff.

5. Use the virtual joysticks to control the aircraft.

6. Use auto landing.

7. Turn off the aircraft.