User Manual
16
©
2018 Ryze Tech. All Rights Reserved.
Tello App
Use this app to control the camera and other aircraft functions. The app is used for conguring your
aircraft, viewing your photos and videos, and copying your photos and videos to folders in your
mobile device.
Connecting to the Aircraft
Enable the Wi-Fi functionality in your mobile device and then select the TELLO-XXXXXX network.
Connection has been established when the live camera view is shown on your mobile device.
Camera View
3m/s
3m
60%
3m/s
3m
S
H
H
1. Auto Takeoff/Landing
Tap to initiate auto takeoff. Tap to initiate auto landing.
There are two auto landing modes: Tap to Land and PalmLand (Hand Landing). In Tap to Land
the aircraft lands automatically. To use PalmLand place your palm under the aircraft, then tap to
conrm and the aircraft will land on your palm and stop its motors.
Only land the aircraft on at surfaces. DO NOT land the aircraft over water, grass or
sand. When using PalmLand, ensure your palm is right under the aircraft and keep your
palm at.
2. Intelligent Flight Modes
Tap to select Intelligent Flight Modes.
3. Settings
Tap to enter the settings screen. You can adjust ight speed, VR settings, Bluetooth joystick
settings, and Wi-Fi settings here.
By default the Tello does not have a Wi-Fi password. You can set a password and you can also
change the Wi-Fi SSID. (To reset the Wi-Fi SSID and password to the default settings, power
on the aircraft and then press and hold the power button for 5 seconds. The Tello will restart
automatically.)