User Manual
TELLO
User Manual
12
©
 2018 Ryze Tech. All Rights Reserved. 
•  Ensure there is sufcient space when using Up & Away. Allow at least 20 ft (6 m) behind 
and 3.5 ft (1 m) above the aircraft.
•  Before using Up & Away ensure that the Aircraft Status Indicator is periodically blinking 
green twice, indicating that the Vision Positioning System is available. 
•  Watch out for potential obstacles  in your surrounding area (especially on the rear,  left, 
and right sides of the aircraft) and stay clear of them to avoid accidents.
•  Be prepared to take control of the aircraft by tapping   in the Tello app to exit Up & 
Away in case of an emergency.
•  Be extra cautious when ying in dark (< 300 lux) or bright (> 10,000 lux) environments.
Propellers
The Tello uses  model  3044P  propellers. There are  two  varieties of 3044P  propellers,  which  are 
designed to spin in different directions. The presence or absence of marks on the propellers 
indicates which type they are and therefore which motors they should be attached to.
Attaching the Propellers
Mount marked propellers on the motors with marked landing gear. Mount unmarked propellers on 
the motors with unmarked landing gear.
When mounting, ensure that the gap between the bottom of the propeller cap and the motor is no 
bigger than needed to insert the propeller removal tool.










