Installation Sheet

SUGGESTED TOOLS AND MATERIALS
Clear Silicone Sealant Level Tape Measure Safety Glasses
10'
Check alignment of side splash with the backsplash and vanity top.
Clean up any excess sealant.
STEP 1:
STEP 3:
INSTALLATION INSTRUCTIONS
SIDE SPLASH
GLASS | GRANITE | MARBLE
ALL SIZES
01.2016
For customer support please visit www.ryvyr.com or call 866.395.8112 weekdays 8:00 to 5:00 EST or fax [phone] any time
For best results in caring for your vanity top, backsplash, and side splash, we suggest:
• Always wipe off spills immediately
• Never use a strong / abrasive cleaner. Always test your cleaning solution on an unnoticeable area before applying it to the entire surface.
• Wipe surfaces clean, immediately after applying cleaner
• Do not allow the cleaner to sit or soak. Never let cleaners sit on the surface of the lavatory.
• Use a soft, dampened sponge or cloth. Never use an abrasive material such as a brush or scouring pad to clean surfaces,
they will scratch the lavatory surface.
• Always rinse and wipe clean the fixtures to prevent soap buildup
CARE AND CLEANING
**NOTE: The vanity top style, shape, basin, and vanity
cabinet may vary from the pictures on this page.
Instructional purposes only.
Place the bottom side of the side splash with sealant, onto the
countertop, and in front of the backsplash - which should already
be in position.
STEP 2:
Apply clear silicone sealant evenly along the bottom, the edge that
will butt up to the backsplash, and the back of the side splash.
SILICONE SEALANT