Installation Sheet

SUGGESTED TOOLS AND MATERIALS
Silicone Sealant Level Tape Measure Safety Glasses
10'
VANITY TOP INSTALLATIONS
Silicone Sealant
1. Install the cabinet / vanity according to the cabinet / vanity manufacturer
2. Check to make sure the vanity top sits level on top of the vanity
3. Apply silicone sealant to the top of cabinet / vanity as shown above
4. Install faucet and drain assembly per the manufacturers' instructions
NOTE: Top style, shape,
cutout on top, and vanity may
vary from the picture above.
Instructional purposes only.
INSTALLATION INSTRUCTIONS
CERAMIC VANITY TOP
INTEGRAL MODELS
ALL SIZES
08.2015
For customer support please visit www.ryvyr.com or call 866.395.8112 weekdays 8:00 to 5:00 EST or fax [phone] any time
For best results in caring for your ceramic vanity top, we suggest:
• Always wipe off spills immediately
• Never use a strong / abrasive cleaner. Always test your cleaning solution on an unnoticeable area before applying it to the
entire surface.
• Wipe surfaces clean, immediately after applying cleaner
• Do not allow the cleaner to sit or soak. Never let cleaners sit on the surface of the lavatory.
• Use a soft, dampened sponge or cloth. Never use an abrasive material such as a brush or scouring pad to clean surfaces,
they will scratch the lavatory surface.
• Always rinse and wipe clean the fixtures to prevent soap buildup
CARE AND CLEANING
Apply bead of quality clear
silicon sealant evenly along
the top of the vanity.
SINK INSTALLATION
CAUTION! Risk of product damage. Do not use plumbers putty or oil-based sealers with
this vanity top. These products will stain surfaces permanently.