Instructions / Assembly

998000888
12-7-21 (REV:02)
FIRST TIME ASSEMBLY
STARTING THE UNIT
Align raised ribs on battery pack with grooves
in the battery port and install the battery pack
into the tiller
(see page 8).
1
2
Press and hold the start button. Pull the bail toward
the handle and release the start button when the
tiller starts (see page 8).
Changing wheel positions (see page 8).
Install the wheels (see page 7).
Install the inner tines (see page 7).
6
2
3
WARNING:
This Quick Reference Guide is not a substitute for reading the operator’s manual. To reduce the risk of injury or death, user must
read and understand operator’s manual before using this product. All page references refer to the operator’s manual.
RY40703 QUICK REFERENCE GUIDE
Install the handle (see page 7).
1
Make the most of your purchase! Go to www.ryobitools.com and
register your new tool online. For questions about operating or
maintaining your product please call, 1-800-525-2579.
Install the outer tines (see page 7).
4
Install the drag stake assembly (see page 7).
5
POSITIONS "1" AND “2”
POSITION "3"