ORIGINAL INSTRUCTIONS 18V Impact Driver R18ID3
Important! It is essential that you read the instructions in this manual before assembling, operating, and maintaining the product. Subject to technical modification.
Safety, performance, and dependability have been given top priority in the design of your impact driver. INTENDED USE The product is intended to be used only by adults who have read and understood the instructions and warnings in this manual, and can be considered responsible for their actions. The product is intended for fastening and removing screws and bolts. Do not use the product in any way other than those stated for intended use.
with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. Ŷ Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. Ŷ Keep cutting tools sharp and clean.
contributing to Raynaud’s Syndrome. After each period of operation, exercise to increase blood circulation. Ŷ Take frequent work breaks. Limit the amount of exposure per day. If you experience any of the symptoms of this condition, immediately discontinue use and see your doctor about these symptoms. no further lubrication is required. Ŷ WARNING ENVIRONMENTAL PROTECTION Recycle raw materials instead of disposing of as waste.
SYMBOLS IN THIS MANUAL Note Warning Torque, maximum Torque, minimum Speed, minimum Speed, maximum The following signal words and meanings are intended to explain the levels of risk associated with this product: DANGER Indicates an imminently hazardous situation, which, if not DYRLGHG ZLOO UHVXOW LQ GHDWK RU VHULRXV LQMXU\ WARNING Indicates a potentially hazardous situation, which, if not DYRLGHG FRXOG UHVXOW LQ GHDWK RU VHULRXV LQMXU\ CAUTION Indicates a potentially hazardous situation, which, if
2 3 1 4 5 6 7 8 9 10 5
20170815v3 1 4 6 5
2 3 7
PRODUCT SPECIFICATIONS Measured sound values determined according to EN 60745: A-weighted sound pressure level Uncertainty K Lp = 96 dB(A) 3 dB 18 V A-weighted sound power level Uncertainty K Lw = 107 dB(A) 3 dB Chuck 6.35 mm Wear ear protectors.
RYOBI® WARRANTY APPLICATION CONDITIONS In addition to any statutory rights resulting from the purchase, this product is covered by a warranty as stated below. 1. The warranty period is 24 months for consumers and commences on the date the product was purchased. This date has to be documented by an invoice or other proof of purchase. The product is designed and dedicated to consumer and private use only. So there is no warranty provided in case of professional or commercial use.
DECLARATION OF CONFORMITY Techtronic Industries GmbH Max-Eyth-Straße 10, 71364 Winnenden, Germany Herewith we declare that the product 18V Impact driver Brand: RYOBI Model number: R18ID3 Serial number range: 44468302000001 - 44468302999999 is in conformity with the following European Directives and harmonised standards (& (8 (8 EN 55014-1:2006+A1:2009+A2:2011, EN 55014-2:2015, EN 60745-1:2009+A11:2010, EN 60745-2-2:2010 RoHS documentation is compiled according to EN 50581:2012 A
