Use and Care Manual

7 — English
SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL NAME DESIGNATION/EXPLANATION
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
min Minutes Time
Direct Current Type or a characteristic of current
Alternating Current Type of current
.../min Per Minute Revolutions, strokes, surface speed, orbits etc., per minute
Class VI Tool DOE certification
FEATURES
PRODUCT SPECIFICATIONS
Cable Diameter .................................................... 0.3125 in.
Cable Length ...............................................................50 ft.
Power Source ................. 18 Volt DC/120 V, AC only, 60 Hz
Minimum Pipe Size (diameter) ................................. 1.25 in.
Maximum Pipe Size (diameter) ..................................... 3 in.
No-Load Speed .................................................60-360/min
WARNING:
Do not attempt to modify this product or create
accessories or attachments not recommended for use
with this product. Any such alteration or modification is
misuse and could result in a hazardous condition leading
to possible serious personal injury.
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
or with damaged or missing parts could result in serious
personal injury.
ASSEMBLY
If any parts are damaged or missing, please call 1-800-525-2579 for assistance.