User guide

Loading Paper

2.4 Printing on Special Media

2.4.2 Printing on Postcards

Postcards must be fed from the manual tray.

• When printing on side 2 (back) of a pre-printed postcard (side 1 (front)

is pre-printed), even the slightest curl may cause paper to jam. Flatten

the postcard and load again.

• You are not recommended to print on multi-coloured postcards.

The example below shows you how to print an address on a postcard.

Example:

Lift the A3 oversize guide and make sure that

the paper guide matches with the postcard size

scale.

Load the postcard with the side to be printed

face-up and the pre-printed postal code boxes

at the far end as shown in the diagram.

Once the postcards are set properly, send a

print command from your application software.

Specify the items shown in the next section

"Printer Driver Settings (when printing on

postcards)" in the printer driver.