Specifications

Agriservices Mbombela -
27/05/2014
Prices are subject to change.
Page 55
Pump rod made from 16mm x 500mm
stainless steel. Used with force head.
Spare part on Jooste force head at code
AFB40.
ROD STAINLESS STEEL JOOSTE
FORCEHEAD
AFB311
16X1000MM
R412.02
1
AFB318
16X800MM
R340.39
1
AFB40-31
16X500MM
R191.43
1
An effective adaptation of a submersible
onto the existing borehole cylinder. The
complete assembly comprises of an acetal
adaptor to fit in the cylinder, 2 stainless
steel nipples, a Tee piece, 1 check valve
and a set of self tapping screws. Designed
for water to enter form the side.
SUB ASSEMBLY JOOSTE
AAS080SUB
AS80
R819.00
1
AAS60SUB
AS60
R710.13
1
AAS70SUB
AS70
R753.35
1
The ball valve is designed to deliver a full
stream of water under very low pressure,
1m to 2m. It can be fitted horizontally or
vertically.
VALVE FLOAT HD JOOSTE
162011
20X50MM
R302.58
1
162012
20X150MM
R321.10
1
162014
25X150MM
R438.43
1
The ball valve is designed to deliver a full
stream of water under high pressure, 100m
or more. The full opening is 28mm. It can
be fitted horizontally or vertically.
VALVE FLOAT LD JOOSTE
162010
32X150MM
R444.60
1
Sometimes farmers have to attach a
submersible pump at the bottom of the
cylinder. An adapter, made of acetyl that is
strong enough is used.
ADAPTOR ACETAL JOOSTE
AF50AA
AF50
R185.25
1
AF60AA
AF60
R213.66
1
AF70AA
AF70
R339.63
1
AF80AA
AF80
R350.12
1
The hand pump is a very effective method
of pumping water with the assistance of a
spring attachment. The built-in spring
balances the flow of water and the
operating weight.
PUMP HAND JOOSTE LEVER ACTION
AAS1001
R4275.0
1
Essential for each borehole, irrespective of
type of pipe is used, to prevent the socket
of the pump rod to chafe the galvanising of
the pipe and the pipes from rusting.
PIPE PROTECTOR JOOSTE
APB1228
12X28
R13.09
1
APB1240
12X40
R17.30
1
APB1628
16X28
R13.59
1
APB1640
16X40
R16.67
1
APB1650
16X50
R21.00
1
APB2050
20X50
R20.99
1
Spare on the cylinder.
CYLINDER BOLT JOOSTE
AS0605B
AS60
R4.94
1
AS0705B
AS70
R4.94
1
Effective in boreholes of 60m and deeper.
Rust protector is mounted at the top of the
cylinder which have a pump rod support
that makes the cylinder 50mm longer than
the normal AS-models. As pressure on the
plunger rings is higher in the ASRDS
models than in the AS models, they have a
double plunger set. The foot valve on these
models work on the same principle.
Cylinder 550mm with 360mm stroke length.
CYLINDER DEEP JOOSTE
AS50RDS
AS50 50-40
R1852.5
1
AS60RDS
AS60 50-40
R1976.0
1
AS70RDS
AS70 50-50
R2223.0
1
AS80RDS
AS80 50-50
R2593.5
1
The Jooste pressure cylinder is used to
pump water at great heights and distances
out of dams or wells. The pressure cylinder
consists of a normal Jooste borehole
cylinder and a force head mounted on top.
At the bottom of the cylinder a base plate is
mounted to fasten on the surface of a dam
or well. 500mm Cylinder with 370mm stroke
length.
CYLINDER PRESSURE SURFACE
JOOSTE
AS100F
AS100 50-40
R5434.0
1
AS50F
AS50 40-40
R3087.5
1
AS60F
AS60 50-40
R3396.2
1
AS70F
AS70 40-40
R3890.2
1
AS80F
AS80 50-40
R4693.0
1