Specifications

Agriservices Mbombela -
27/05/2014
Prices are subject to change.
Page 51
Connector between the Apex float valve
arm and ball. Suitable for deep trough and
farm dams. Use with complete floats at
code 600032.
VALVE FLOAT CORD AND NIPPLE SET
CN
600090
R24.32
1
Tank inlet control device with variable min
and max water level settings. High volume
water inlet control, must be installed
horizontally. Working pressure 55 -
1000kPa (8 - 150 PSI). Reduces pump run
time and stop/start operations, save
electricity and increases pump life.
VALVE FLOAT PUMP BUDDY APEX
600076
20MM
R929.56
1
600077
25MM
R976.05
1
Compact design for use in small or narrow
troughs or spaces. Two float positions to
allow for water level adjustments. Quality
acetyl construction with no metal
valve seat corrosion. Working pressure 0-
850kPa (120 PSI). Total length 270mm,
float included.
VALVE FLOAT SPACE SAVER APEX
Used at cribs for cattle and sheep. Working
pressure 25mm valve 50kPa = 21l/min and
200kPa = 48 l/min. Maximum pressure
500kPa.
Working pressure 40mm valve 30kPa = 76
l/min. Maximum pressure 400kPa.
VALVE FLOAT WITH BALL EDUAN
407-VLOTTER
25MM
R141.31
1
Leather washer for replacement on cold
water taps.
WASHER TAP LEATHER LARGE
2040638
20MM
R3.93
10
2040778
25MM
R3.93
10
Rubber washer for replacement of
damaged washers on taps.
WASHER TAP RUBBER
333C097-15
15MM HD 20MM LD
R6.53
10
333C097-20
20MM HD 25MM LD
R7.17
10
333C097-25
25MM HD
R8.64
10
333C098-15
15MM LD
R4.96
10
Plate with washer for replacement of
damaged part on taps.
WASHER WITH PLATE COBRA
333S093-15
15MM HP
R42.00
10
333S093-20
20MM HP
R62.28
10
Brass arm for replacement on Agrinet low-
pressure and high-pressure ball valves.
Float valves at codes 333700-020, 333710-
050.
VALVE FLOAT ARM BRASS
333760-015
286X15MM
R41.32
1
333760-020
340X20MM
R48.11
1
333760-025
420X25MM
R76.05
1
333760-032
422X32MM
R136.95
1
333760-040
452X40MM
R139.18
1
333760-050
542X50MM
R145.64
1
Brass ball valve arm for replacement on
ball valve. Complete valves at code
935020.
VALVE FLOAT ARM BRASS ECON TYPE
935120
15-25MM
R33.97
1
Brass low-pressure ball valve for flow
control by tanks and reservoirs. Loose arms
at code 935120.
VALVE FLOAT BRASS ECON TYPE
935015
15MM
R79.88
1
935020
20MM
R89.69
1
935025
25MM
R174.52
1
High-pressure brass ball valves with
recommended operating pressure between
200kPa and 2 000kPa. Replacement arm at
code 333760-025. Brass ball at code 332-
B200. Polyurethane balls at codes 332-
C3498, 332-C3548, 332-C3629. Plastic
ball at code 332-P125.
VALVE FLOAT HIGH PRESSURE BRASS
333700-015
15MM
R91.36
1
333700-020
20MM
R148.90
1
333700-025
25MM
R243.18
1
333700-032
32MM
R504.84
1
333700-040
40MM
R523.55
1
333700-050
50MM
R633.13
1