ORIGINAL INSTRUCTIONS 18V SDS Rotary Hammer R18SDS
Important! It is essential that you read the instructions in this manual before assembling, operating and maintaining the product. Subject to technical modifications.
Safety Safety, performance, and dependability have been given top priority in the design of your rotary hammer. Ŷ Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. Ŷ When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
Safety the battery pack from the power tool before making any adjustments, changing accessories or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. Ŷ Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
Safety ADDITIONAL BATTERY SAFETY WARNINGS WARNING To reduce the risk of fire, personal injury, and product damage due to a short circuit, never immerse your tool, battery pack or charger in fluid or allow a fluid to flow inside them. Corrosive or conductive fluids, such as seawater, certain industrial chemicals, and bleach or bleach-containing products, etc., can cause a short circuit.
Safety WARNING Do not at any time let brake fluids, gasoline, petroleumbased products, penetrating oils, etc., come in contact with plastic parts. They contain chemicals that can damage, weaken or destroy plastic. Electric tools used on fiberglass material, wallboard, spackling compounds, or plaster are subject to accelerated wear and possible premature failure because the fiberglass chips and grindings are highly abrasive to bearings, brushes, commutators, etc.
Know your product 2 3 4 1 5 5
Getting started 1 1 2 4 6 5
Getting started 2 3 7
Operation 1 3 1 2 2 3 8
Operation 1 2 3 20170831v3 4 9
PRODUCT SPECIFICATIONS BATTERY AND CHARGER 18V SDS Rotary Hammer Model Model R18SDS Voltage 18 V No-load speed 0 - 1300 min Impact rate 0 - 5000 min-1 Impact energy (According to EPTA procedure 05/2009) 1.
RYOBI® WARRANTY APPLICATION CONDITIONS In addition to any statutory rights resulting from the purchase, this product is covered by a warranty as stated below. 1. The warranty period is 24 months for consumers and commences on the date the product was purchased. This date has to be documented by an invoice or other proof of purchase. The product is designed and dedicated to consumer and private use only. So there is no warranty provided in case of professional or commercial use.
AUTHORISED SERVICE CENTRES ACD PLANT LTD 145 Southbank Road Coundon Coventry, West Midlands CV6 1FG Phone: 02476 594348 Email: danmcgunigle@acdplant.co.uk Web: www.acdplant.co.uk CBS Power Tools Limited Unit 4, V P Square Storeys Bar Rd, Fengate Peterborough, Cambridgeshire PE1 5YS Phone: 01733 343031 Email: steve@cbspowertools.co.uk Web: www.cbspowertools.com C D Powertools 76 Old Road Churwell Morley, Leeds LS27 7TH Phone: 0113 2718494 Email: info@cdpowertools.co.uk Web : www.cdpowertools.co.
DECLARATION OF CONFORMITY Techtronic Industries GmbH Max-Eyth-Straße 10, 71364 Winnenden, Germany Herewith we declare that the product 18V SDS Rotary Hammer Brand: RYOBI Model number: R18SDS Serial number range: 44430102000001 - 44430102999999 is in conformity with the following European Directives and harmonised standards 2011/65/EU, 2006/42/EC, 2014/30/EU, EN 60745-1:2009+A11:2010, EN 60745-2-6:2010, EN55014-1:2006+A1:2009+A2:2011, EN 55014-2:2015 RoHS documentation is compiled according to EN 50581:2012
Techtronic Industries GmbH Max-Eyth-Straße 10, 71364 Winnenden, Germany 961075341-03
