CDR180 COMPACT DIGITAL RADIO OWNER’S OPERATING MANUAL ORIGINAL INSTRUCTIONS
DESCRIPTION 1. 2. 3. 4. 5. 6. 7. 8. Digital display Integrated auxiliary cable Retainer strap Touch pad controls Antenna Screw Battery cover AAA batteries 17. Low battery indicator 18. Tune/seek 19. Clock button 20. Volume up button 21. Volume down button 22. MP3 player (not included) 23. Retainer strap 24. Integrated auxiliary cable 9. Battery compartment 10. Battery pack 11. Battery port 12. Latches 13. On/off button 14. Volume 15. Mode 16. Preset 5 1 4 2 3 Fig.
15 13 16 14 17 18 Fig. 4 19 21 20 Fig. 5 24 23 22 Fig.
Important! It is essential that you read the instructions in this manual before operating this machine. Subject to technical modifications.
English 3. PERSONAL SAFETY a. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. b. Use personal protective equipment. Always wear eye protection.
English dangerous in the hands of untrained users. e. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g.
English NOTE: This radio is capable of receiving AM (Amplitude Modulated) and FM (Frequency Modulated) radio signals. The AM frequency range is 522-1620 KHz or MW (Medium Wave). The display on the radio will show MW and FM. battery packs. BATTERY PROTECTION FEATURES Ryobi 18 V lithium-ion batteries are designed with features that protect the lithium-ion cells and maximise battery life.
English To remove: Depress the latches on both sides of the battery pack to release and remove the battery pack. MANUAL TUNING See Figure 4. The TUNE/SEEK buttons are used to manually tune to the desired radio frequency. The selected frequency is displayed on the digital display. DIGITAL DISPLAY See Figure 4. To use tune feature: The digital display on the front of the radio illuminates when the radio is switched on, displaying the time or frequency, and mode.
English To set the clock: MAINTENANCE Press the CLOCK button until the time is displayed on the digital display. WARNING Press and hold the CLOCK button. The number representing the hours will blink on and off. When servicing, use only identical Ryobi replacement parts. Use of any other parts may create a hazard or cause product damage. Press the VOLUME UP or VOLUME DOWN button to set the hour.
English Wear ear protection Wear eye protection Please read the instructions carefully before starting the machine. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.
TECHTRONIC INDUSTRIES (AUSTRALIA) PTY. LTD. Level 1. 666 Doncaster Road, Doncaster, Victoria 3108 Australia. Tel: 61 3 9840 3226 Fax No.: 613 9840 6133 www.ryobi.com.
