960223559-02(CDI-1801M/CDI-1802M) CDI-1801M/CDI-1802M CORDLESS IMPACT DRILL DRIVER 15 15 OWNER’S OPERATING MANUAL
Important! It is essential that you read the instructions in this manual before mounting and operating this machine.
English b) Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. c) Avoid accidental starting. Ensure the switch is in the off position before plugging in. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents. d) Remove any adjusting key or wrench before turning the power tool on.
English GENERAL SAFETY RULES No load speed (impact mode): -Lo speed (min-1) 0 - 5200 -Hi speed (min-1) 0 - 18200 35 Max.Torque (Nm) Battery pack (Not included): BPP-1817M/ BPP-1815M Charger (Not included) BC-1800/ BC-1815S g) Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed.
English REVERSIBLE (Fig. 6) OPERATION This tool has the feature of being reversible. The direction of rotation is controlled by a selector located above the switch trigger. With the drill held in normal operating position, the direction of rotation selector should be positioned to the left of the switch for drilling. The drilling direction is reversed when the selector is to the right of the switch. When the selector is in center position, the switch trigger is locked.
English MAINTENANCE ENVIRONMENTAL PROTECTION WARNING When servicing, use only identical replacement parts. Use of any other part may create a hazard or cause product damage. Recycle raw materials instead of disposing as waste. The machine, accessories and packaging should be sorted for environmental-friendly recycling. Avoid using solvents when cleaning plastic par ts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use.
GUARANTEE - STATEMENT This Ryobi product is guaranteed from defects in material and workmanship, for a period of twenty-four (24) months, effective and evidenced from date of original invoice or delivery note. Defects caused by normal wear and tear, unauthorized/improper maintenance/handling or overload are excluded from this guarantee as are accessories such as battery packs, bulbs, blades and bits, etc.
960223559-02
960223612-01(CAP-1801M).
960223612-01(CAP-1801M).
960223612-01(CAP-1801M).
960223612-01(CAP-1801M).qxd 5/25/03 9:25 AM Page A4 Important! It is essential that you read the instructions in this manual before mounting and operating this machine.
960223612-01(CAP-1801M).qxd 5/25/03 9:25 AM Page A5 English PERSONAL SAFETY GENERAL SAFETY RULES ■ WARNING Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term "power tool'' in all of the warnings listed below refers to your mains operated (corded) power tool or battery operated (cordless) power tool. ■ SAVE THESE INSTRUCTIONS. WORK AREA ■ ■ ■ ■ Keep work area clean and well lit.
960223612-01(CAP-1801M).qxd 6/9/03 10:10 AM Page A6 English SERVICE GENERAL SAFETY RULES ■ ■ ■ ■ ■ Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. Maintain power tools. Check for misalignment or bindling of moving parts, breakage of parts and any other condition that may affect the power tools operation.
960223612-01(CAP-1801M).qxd 5/25/03 9:25 AM Page A7 English SWITCH LOCK (Fig. 3) OPERATION The switch trigger can be locked in the OFF position to prevent the possibility of accidental starting when not in use. To lock the switch trigger, place the direction of rotation selector (Forward/Reverse Selector) in the center position.
960223612-01(CAP-1801M).qxd 5/25/03 9:25 AM Page A8 English ■ OPERATION INSTALLING BITS (Fig. 4-5) ■ ■ ■ ■ ■ ■ Lock the switch trigger by placing the direction of rotation selector in center position. Open or close the chuck jaws to a point where the opening is slightly larger than the bit size you intend to use. Also, raise the front of the drill slightly to keep the bit from falling out of the chuck jaws. Insert the drill bit straight into the chuck the full length of the jaws.
960223612-01(CAP-1801M).qxd 5/25/03 9:25 AM Page A9 English ■ MAINTENANCE WARNING To avoid serious personal injury, always remove thebattery pack from the tool when cleaning or performing any maintenance. ■ GENERAL MAINTENANCE ■ Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc.
960223612-01(CAP-1801M).qxd 5/25/03 9:25 AM Page A10 GUARANTEE - STATEMENT This product is guaranteed from defects in material and workmanship, for a period of twenty-four (24) months, effective and evidenced from date of original invoice or delivery note. Defects caused by normal wear and tear, unauthorized / improper maintenance/handling or overload are excluded from this guarantee as are accessories such as battery packs, bulbs, blades and bits, etc.
960223612-01(CAP-1801M).
