960223559-02(CDI-1801M/CDI-1802M) CDI-1801M/CDI-1802M CORDLESS IMPACT DRILL DRIVER 15 15 OWNER’S OPERATING MANUAL
Important! It is essential that you read the instructions in this manual before mounting and operating this machine.
English b) Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. c) Avoid accidental starting. Ensure the switch is in the off position before plugging in. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents. d) Remove any adjusting key or wrench before turning the power tool on.
English GENERAL SAFETY RULES No load speed (impact mode): -Lo speed (min-1) 0 - 5200 -Hi speed (min-1) 0 - 18200 35 Max.Torque (Nm) Battery pack (Not included): BPP-1817M/ BPP-1815M Charger (Not included) BC-1800/ BC-1815S g) Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed.
English REVERSIBLE (Fig. 6) OPERATION This tool has the feature of being reversible. The direction of rotation is controlled by a selector located above the switch trigger. With the drill held in normal operating position, the direction of rotation selector should be positioned to the left of the switch for drilling. The drilling direction is reversed when the selector is to the right of the switch. When the selector is in center position, the switch trigger is locked.
English MAINTENANCE ENVIRONMENTAL PROTECTION WARNING When servicing, use only identical replacement parts. Use of any other part may create a hazard or cause product damage. Recycle raw materials instead of disposing as waste. The machine, accessories and packaging should be sorted for environmental-friendly recycling. Avoid using solvents when cleaning plastic par ts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use.
GUARANTEE - STATEMENT This Ryobi product is guaranteed from defects in material and workmanship, for a period of twenty-four (24) months, effective and evidenced from date of original invoice or delivery note. Defects caused by normal wear and tear, unauthorized/improper maintenance/handling or overload are excluded from this guarantee as are accessories such as battery packs, bulbs, blades and bits, etc.
960223559-02
960986016-01 5/26/03 5:10 PM Page A1 ® CJSP-1801QEOM CORDLESS ORBITAL JIGSAW OWNER’S OPERATING MANUAL
960986016-01 5/26/03 5:10 PM Page A2
960986016-01 5/26/03 5:10 PM Page A3
960986016-01 5/26/03 5:10 PM Page A4 Important! It is essential that you read the instructions in this manual before mounting and operating this machine.
960986016-01 5/26/03 5:10 PM Page A5 English CAUTION Failure to obey a safety warning may result in serious injury to yourself or to others. Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury. INTRODUCTION Your orbital jigsaw has many features for making cutting operations more pleasant and enjoyable. Safety, performance and dependability have been given top priority in the design of this tool making it easy to maintain and operate.
960986016-01 5/26/03 5:10 PM Page A6 English GENERAL SAFETY RULES ■ ■ ■ ■ Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. When operating a power tool outdoors, use an extension cord suitable for outdoor use.
960986016-01 5/26/03 5:10 PM Page A7 English 18. DEPRESS LATCH TO RELEASE BATTERY PACK 19. BATTERY PACK (NOT INCLUDED) GENERAL SAFETY RULES ■ Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
960986016-01 5/26/03 5:10 PM Page A8 English TO REMOVE BATTERY PACK (NOT INCLUDED) FEATURES See Figure 11. ■ BLADE AND HEX KEY STORAGE See Figure 2. As shown in Figure 2, the blade storage area is located on the back of your saw and the hex key storage area is located on the base. They are convenient for storing extra blades, storing blades when not in use, and storing the hex key provided with your saw. BLADE STORAGE AREA ■ ■ ■ Locate latches of battery pack and depress to release the battery pack.
960986016-01 5/26/03 5:10 PM Page A9 English SPLINTER-FREE CUTTING OPERATION See Figure 9. The base of your jig saw has a narrow slot to permit splinterfree cutting. It is especially useful when cutting plywood. This feature should only be used when making straight cuts or circle cuts. It is not for bevel cutting or plunge cutting. BEVEL CUTTING See Figures 6 and 7. Bevel cutting angles may be adjusted from 0° to 45° right or left.
960986016-01 5/26/03 5:10 PM Page A10 English MAINTENANCE DO NOT abuse power tools. Abusive practices can damage tool as well as workpiece. WARNING Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. Have your tool repaired by a qualified person.
960986016-01 5/26/03 5:10 PM Page A11 GUARANTEE - STATEMENT This product is guaranteed from defects in material and workmanship, for a period of twenty-four (24) months, effective and evidenced from date of original invoice or delivery note. Defects caused by normal wear and tear, unauthorized / improper maintenance/handling or overload are excluded from this guarantee as are accessories such as battery packs, bulbs, blades and bits, etc.
960986016-01 5/26/03 5:10 PM Page A12 960986016-01