Specifications

Avolites Rolacue Operators Manual - page 95
rq96man 19/09/1996 18:30
• You can now move all the Fixtures together, or step through each Fixture
allowing easy adjustment of each one using the Step to Next and Step
to Last buttons.
Move them by sliding the stylus around the Stage area of the Tablet.
To change just Pan or Tilt, touch the appropriate Attribute Select button
(3 for Pan, 18 for Tilt), and slide the stylus.
Fixtures can also be selected by using the Group and Fixture Select
buttons.
• When you have finished editing the Preset Focus click on the Store Pan /
Tilt button.
This will store the Preset Focus back into the Focus Select button you first
recalled.
• You can now use the Next Focus button to select the next Preset Focus,
or use Recall Focus followed by clicking onto a Focus Select button to
edit another Positional Preset Focus.
14.8 The ML Functions
14.8.1 Locate Fixture
• Use the Fixture buttons or recall a Group to select the Fixtures.
• Click on Locate Fixture.
The Fixture will turn on in open white, no gobo, and at 50% pan and tilt.
Locate Fixture does not select LTP Channels for recording, you must still do
this in the usual way.
14.8.2 Flip
This function is only for use with moving head Fixtures, because these have
two possible Pan and Tilt positions for each point on the stage.
With the Fixture selected click on Flip and the Pan and Tilt positions will
change to the alternative position.
This is useful when a Fixture has press its Pan stop.
14.8.3 Select All
If you wish to reselect all the Fixtures in the last Group you used, then click
on Select All.
14.8.4 Clear Programmer, Release Fixture and DeLatch Fixtures
These three functions work on the Programmer in different ways.
Clear Programmer clears the contents of the Programmer removing any
changes you have made and not saved. It has the same function as the
Clear button on the desk.
Release fixture or Untouch is similar to Clear Programmer, but it clears
from the programmer ONLY Fixtures that are selected. Consider it a selective
clear function.
DeLatch Fixture removes control of a Fixture from the Tablet, but leaves any
changes in the programmer ready to be recorded.
14.8.5 OFF
This function turns any selected Attributes OFF in the Programmer.
• Select Fixtures you wish to work with.