Specifications

Avolites Rolacue Operators Manual - page 65
rq96man 19/09/1996 18:30
This Preset focus information is customisable by editing the Personality File.
Details on how to do this are contained in the Personality File Technical
Manual.
Normally the automatically loaded Preset Focuses are as follows.
Preset Focus buttons 1 to 10 Colours.
Preset Focus buttons 11 to 21 Gobos.
Preset Focus buttons 21 to 29 Positions (see below).
UPSTAGE
26 24 27
22 21 23
28 25 29
DOWNSTAGE
This is a table of Pan and Tilt positions for the default pre-programmed
Positional Preset Focuses assuming the Instrument is placed above 21.
Pre programmed Preset Focused can be deleted and edited in the usual way.
8.10 Replaying a Preset Focus over a time
This is a great feature for busking a show in Takeover Run mode. See
Section 11.4.2 TAKEOVER RUN MODE.
You can recall a Preset Focus live over a given time.
• Turn the Key to Program. Puts you in LIVE PROGRAM MODE.
This is generally most useful in Takeover Run Mode but may also be
convenient whilst programming. This does not work in other Run modes.
In order for this function to work, there must be an available Playback Fader on the
current Roller Page.
An available Playback Fader is defined as :
a). Being completely empty
b) Having a Memory recorded on it, but with the Playback Fader at zero
c) Having a Chase recorded on it which is both at zero and set to FADER RELOADS
CHASE mode in the Chase Parameters.
8.11 Help and hints
8.11.1 Advice on changing the Focus Mask
The experience of the Author is that it is best not to change the Focus Masks
once you start programming.
• Select the Fixtures you want to use.
• Press and hold down the STORE FOCUS button while you check and
change the Focus Mask if necessary.
• Select the Preset Bank of the Attribute you wish to recall.
• Enter a time in seconds on the Keypad.
Do not press ENTER.
• Select the Preset Focus.