Specifications

Avolites Rolacue Operators Manual - page 57

rq96man 19/09/1996 18:30

• Turn the Key to Program.

Puts you in LIVE PROGRAM MODE menu.

• Connect the Chase.

• Press the blue INSERT button on the Program Select bank.

Its LED will light

• Press Softbutton A [RENUMBER].

Screen asks you if you are sure you want to

renumber Chase.

• Press Softbutton F [YES] to confirm the renumbering or Softbutton A

[NO] to stop it.

• See also Section 7.14.6 Renumbering the UNFOLDED Chase.

7.29 Setting the Chase Parameters

To access the Chase Parameters menu :

• Turn the Key to Program.

Puts you in LIVE PROGRAM MODE menu.

• Press Softbutton A [CHASE PARAMETERS].

This function allows you to specify how the Connected Chase will replay.

There are two Screens of options toggled by pressing Softbutton F [MORE].

⇒ The second Screen has options which were previously global used to be

found in the USER SETTINGS options.

On PAGE 1 are :

7.29.1 Softbutton A - SAVE SPEED

This saves the temporary speed which may have been set by moving the

Wheel(s) after programming.

7.29.2 Softbutton B - SAVE DIRECTION

This allows the Chase direction to be recorded, the options being forward,

backwards, and bounce.

7.29.3 Softbutton C - NORMAL / RANDOM

This allows the steps to be replayed in random order. Useful for disco effects.

7.29.4 Softbutton D - STOP ON FINAL STEP?

This allows you to stop the Chase on the last step. Consider making this a

blackout step, then you may press GO to activate some one off effect

whenever you require it.

Press Softbutton G [MORE] to access PAGE 2 :

7.29.5 Softbutton A - FADER STOPS /STARTS CHASE / FADER WILL RELOAD CHASE

/ FADER STOPS, GO TO START CHASE

These three options control what happens when a Chase Playback Fader is

moved from and to zero.

FADER STOPS / STARTS CHASE starts the Chase as the Playback Fader is

moved up and stops the Chase when it is moved down to zero. Moving it up

again causes the Chase to start from the position it was stopped at.

FADER WILL RELOAD CHASE always starts the Chase from the first step

whenever the Playback Fader is moved up from zero.