Specifications

Avolites Rolacue Operators Manual - page 56
rq96man 19/09/1996 18:30
• Bring up a Playback Fader to run a Chase.
• Connect the Chase.
• Tap Softbutton G twice to set Chase time.
The Chase will now play at the rate set by the taps.
Save the Speed using the Save Speed function in the Chase Parameters
menu. See Section 7.29.1 Softbutton A - SAVE SPEED.
7.25 Deleting a Chase
• Turn the Key to Program.
Puts you in LIVE PROGRAM MODE menu.
• Press the blue DELETE button on the Program Select bank.
Its LED will light
up
.
• Press the Playback SWOP button TWICE of the Chase you want to
delete.
The DELETE LED will go out, and so will the LED on the Playback Channel you
just deleted, indicating that it is now empty.
7.26 Deleting a Chase Step
• Turn the Key to Program.
Puts you in LIVE PROGRAM MODE menu.
• Connect the Chase.
• Press the blue DELETE button on the Program Select bank.
Its LED will light
up
.
• Type in the number of the Chase Step you wish to delete and press
ENTER.
Screen asks you if you are sure you want to delete the step.
• Press Softbutton A [YES] to confirm the deletion or Softbutton F [NO] to
stop it.
See also 7.14.7 DELETE in the UNFOLD Section.
7.27 Inserting a Chase Step
• Turn the Key to Program.
Puts you in LIVE PROGRAM MODE menu.
• Connect the Chase.
• Set up the step you wish to Insert.
• Press the blue INSERT button on the Program Select bank.
Its LED will light
up
.
• Type in the number of the Chase Step you wish to Insert and press
ENTER.
The Step Number should be a decimal value between the two step
numbers you wish it to appear between
.
The new step appears as the Step number you entered.
See also 7.14.5 INSERT in the UNFOLD Section.
7.28 Renumbering a Chase
If you have Inserted or Deleted steps, you can renumber the Chase so that
the Steps are all whole numbers starting from 1.