Specifications

Avolites Rolacue Operators Manual - page 42
rq96man 19/09/1996 18:30
It means that the original Memory is replicated, but it also means that all the
replicas and the original are linked, and changing ANY of the linked
Memories changes ALL of them. Deleting a Copy does not affect the other
replicas.
To Copy a Memory :
• Press and hold down the grey ADD button of the Memory you wish to
Copy.
You are asked to press a Playback SWOP button.
• Press the SWOP button of the Playback Channel you wish the Copy to
occupy.
You can change Roller Pages or Facets if you need to while the ADD button is
still held down
.
Linked Copies can be replayed and edited like any other Memory, but any
changes will affect ALL the Linked Memories.
6.9 Photocopying or Duplicating a Memory
If you want to duplicate a Memory (or Chase), but don’t want it Linked to any
other Memory, use Photocopy on the Pearl, DUPLICATE on the Sapphire.
• Turn the Key to Program.
Puts you in LIVE PROGRAM MODE menu.
• Press the blue PHOTOCOPY (DUPLICATE) button on the Program
Select bank.
Its LED will light up.
• Press and hold down the grey ADD button of the Memory you wish to
Photocopy.
You are asked to press a Playback SWOP button.
• Press the SWOP button of the Playback Channel you wish the Photocopy
to occupy.
You can change Roller Pages or Facets if you need to while the ADD button
is still held down
.
6.10 Deleting a Memory
• Turn the Key to Program.
Puts you in LIVE PROGRAM MODE menu.
• Press the blue DELETE button on the Program Select bank.
Its LED will light
up
.
• Press the Playback SWOP button TWICE of the Memory you want to
delete.
The DELETE LED will go out, and so will the LED on the Playback Channel you
just deleted, indicating that it is now empty
.
6.11 Previewing a Memory
To see the output of a Memory in Program or Run mode :
• Press the VIEW button.
• Press the SWOP button of the Memory you want to VIEW
. The Playback
Fader does not have to be up
.
• You can step through the Preset Banks and see the desk outputs for
each Attribute for the VIEWED Memory.
• Press EXIT to quit.