Specifications

Avolites Rolacue Operators Manual - page 32
rq96man 19/09/1996 18:30
The programming associated with the Fixture is preserved, and you need to
patch a new DMX address onto the Handle.
If you are changing the DMX address of an Intelligent Fixture, you will be
asked to press ENTER to confirm the repatch.
⇒ Remember that patching a Dimmer onto a Handle already occupied by
another Dimmer simply adds the new Dimmer to the Handle.
Do not delete anything or your programming may be lost!!
5.13 Changing the Handle of a Dimmer or Fixture
To change the Handle of a Dimmer or Intelligent Fixture, simply patch it again
onto another Handle. You will have to press ENTER to confirm the move.
Changing the Handle of a Dimmer or Intelligent Fixture loses all the
Programming for that device.
5.14 Deleting a DMX assignation
• Turn the Key to Program.
Puts you in LIVE PROGRAM MODE.
• Press the PATCH button on the blue Program Select bank
. Puts you in the
PATCH DIMMER OR DEVICE menu.
• Press the DELETE button on the blue Program Select bank.
Its LED
flashes.
• Type in the number of the DMX Channel you want to clear.
• Press ENTER.
• Either type in another DMX address to clear or press EXIT to quit.
Puts
you back in the PATCH menu.
5.15 Deleting a Handle
• Turn the Key to Program.
Puts you in LIVE PROGRAM MODE.
• Press the PATCH button on the blue Program Select bank
. Puts you in the
PATCH DIMMER OR DEVICE menu.
• Press the DELETE button on the blue Program Select bank.
Its LED flashes.
• Press the ADD or SWOP button of the Handle you want to clear.
• Press ENTER.
• Either press another ADD or SWOP button to clear another Handle or
press EXIT to quit.
Puts you back in the PATCH menu.
⇒ Deleting a Handle loses all the Programming associated with it. You
should therefore use this function with care!
5.16 Deleting an entire patch
Since deleting all the handles loses all the data programmed with them
anyway, the best way to do this is to do a WIPEALL. See 1.6.1 To do a
WIPEALL.