Specifications

Avolites Rolacue Operators Manual - page 14
rq96man 19/09/1996 18:30
The fixtures will now respond to the Wheel(s), controlling the Attribute
selected from the Preset Bank. If you change Preset Bank, the Wheel(s)
remain connected to the original bank active when you made the connection.
3.4.5 How the Wheels control the Attribute
On the Sapphire :
The Sapphire has one Wheel, and Connection is moved between the Wheel
and the two sets of Attributes using the Up and Down Cursor buttons.
The top Attribute on the Preset Bank is controlled by the Wheel when the Up
Cursor button is pressed. This is how Wheel A is selected.
The bottom Attribute is controlled when the Down Cursor button is pressed.
This is how Wheel B is selected.
On the Pearl :
The Pearl has two Wheels.
The top Attribute on the Preset Bank is controlled by the Right Hand Wheel
(Wheel B) and the bottom Attribute is controlled by the Left Hand Wheel
(Wheel A).
For example, here is how an eight channel Intellabeam Moving Mirror light is
controlled. I have assumed that the Fixture is Selected.
Presets
Bank ‘A’ ‘B’
1 Dimmer -------
2 Iris Strobe
3 Tilt Pan
4 Colour -------
5 ------- -------
6 Gobo -------
7 ------- -------
8 Speed -------
Choosing Preset Bank 1 (LAMPS) and moving Wheel A will turn on the
Dimmer Channel.
Choosing Preset Bank 3 (PAN / TILT) and moving Wheel A will move the Tilt
axis of the mirror. Wheel B will alter the Pan.
Selecting Preset Bank 4 (COLOUR / COLOUR) and moving Wheel A will
move the colour Wheel of the Fixture. Using Wheel B will not affect the
Fixture as it only has one colour Wheel.
3.4.6 Controlling Intelligent Fixtures using Preset Faders
• Press a Preset Bank button. The LED lights up.
• The top Preset Faders will now control the top Attribute on the button,
and the bottom Preset Faders now control the bottom Attribute.