Specifications

Avolites Rolacue Operators Manual - page 105
rq96man 19/09/1996 18:30
16.7 Explanation of other Script File commands
16.7.1 Reset Timer
This is only available when Internal or Manual timers are being used and it
resets the timer to the last entered time from the select timer menu.
16.7.2 Clear Masters
This releases Playback Faders which are under the control of Timecode.
When pressed the output on stage may be blacked out! Beware!!
16.8 Recalling your Script File
• Turn the Key to Run.
• Press Softbutton D [RUN SCRIPT FILE].
16.8.1 Selecting the Timecode source in Run mode
• Press Softbutton D [RUN SCRIPT FILE].
• Press Softbutton A [SELECT A TIMER SOURCE]
. Decide which time source
will be used, Timecode or Internal Clock
.
• Press either Softbutton A [EXTERNAL TIME SOURCE].
The clock is set to
zero and the desk awaits an external Time Code
,
or Softbutton D [INTERNAL TIMER / TC].
The Internal Clock may start to run.
You can also stop and start the Internal clock from this menu.
16.8.2 Selecting the Script File to run
• Press Softbutton D [RUN SCRIPT FILE].
• Press Softbutton C [SELECT A SCRIPT FILE].
• Enter the Script File number you want to replay onto the Keypad.
• Press ENTER.
This loads the selected Script File, but does not execute any steps.
16.8.3 Running your Script File
Having selected a Script File to run, you can execute it from step 1 like this :
• Press Softbutton D [RUN SCRIPT FILE].
• Press Softbutton D [START FROM STEP 1], then press Softbutton D
[YES] to confirm.
The Script File will be loaded but not executed. The timer will be stopped
and you can :
• either press Softbutton E [CONNECT TIMER] to begin running the
Script file to Timecode.
Softbutton now changes to [DISCONNECT TIMER] and the
[NEXT STEP] Softbutton disappears.
or press Softbutton F [NEXT STEP] to step through the Script File Steps
manually.
If you want to start from any other step than step 1 :
• Type in the step number on the Keypad and press ENTER.