Instruction manual

14
CONNECTION DETAILS
Connection diagrams for rear panel connectors
Possible types of DMX cables required
Connection Cable required
Navigator to Discovery / Defender 3 pin XLR male to 3 pin XLR female
Navigator to TinyScan / TinyScan Plus 3 pin XLR male to 2.5mm Stereo Jack plug
TinyScan / TinyScan plus to Defender or Discovery 2.5mm Stereo Jack plug to 3 pin XLR female
Defender / Discovery to TinyScan / TinyScan Plus 3 pin XLR male to 2.5mm stero Jack plug
A terminator for the end of a DMX cable run can be constructed from a 3 pin XLR male with a 100
ohm resistor (Brown Black Brown) connected between pins 2 and 3
All connectors should be of the in-line type.
SPECIFICATION
Size 4U 19” Rack mount 70mm or sloping front desk mounting case
Weight 3Kg
Power Supply 12-25Vdc @ 300mA
Control Channels 128 (16 fixtures of 8 DMX channels each)
Scenes Up to 128
Chases Up to 128
Chase Steps Up to 32 per chase
Shows Up to 16
Show Steps Up to 32 per show
Optional Interface for recall of Scenes, Chases or shows by MIDI
The Navigator conforms to EN 60730-2-1, EN 60335-1, EN50 082 and EN55 014
!1999
Ryger Ltd
Feidr Castell Business Park, Fishguard, Pembs, UK, SA65 9BB
T:[phone] F:[phone]
[e-mail] www.ryger.co.uk