Instruction manual

13
RESTORING DEFAULT SETTINGS
From the Setup menu there is an option, init, which allows certain aspects of the Navigator to be reset
to their default settings. This option should be used with extreme care as it’s effects are irreversable.
A description of the options will be given below.
From the main menu select Setup to enter the Setup menu and then Select Init. The following options
will be given:
Fixpers - Selecting this option will remove any changes made to the pre - stored Ryger fixture types
after confirmation.
Userprs - Selecting this option will remove any changes made to the User personalities and reset all
User personalities to their default settings. ANY CUSTOM FIXTURE TYPES THAT HAVE BEEN
PROGRAMMED WILL BE LOST. You will be asked for confirmation before the operation is carried
out.
All - WARNING Selecting this option will ERASE ALL DATA PROGRAMMED INTO THE
NAVIGATOR INCLUDING THE PRE-PROGRAMMED SCENES AND CHASES AND RETURN
IT TO A BLANK STATE. You are asked for confirmation before the operation is carried out.