Instruction manual

12
page. The scene or chase page can be selected by the keys. For shows there is only one page,
the keys will have no effect in the show selecting mode.
Auto / Sound - This option will toggle between automatic and sound mode for recalled chases and
shows. In Auto mode a chase will play back with it’s stored hold setting making the time between
chase steps equal. In Sound mode the chase will advance a step when a bass beat is detected by the
internal microphone.
Setup - This option will allow access to the Programming mode of the Navigator. You will be
prompted to enter the passcode before access to the programming mode is allowed. Upon entry of the
correct passcode the Navigator will be temporarily unlocked allowing reprogramming or storage of
more scenes, chases or shows.
Recall of scenes, chases and shows in playback only mode
To recall a scene, chase or show, select the appropriate recall mode. Select the page with the
keys (Scenes and Chases only). Pressing a scanner selection key with a dimly lit light will instantly
recall the stored scene, chase or show. The light will change from dimly lit to brightly lit to show the
selection has been made.
With the optional MIDI interface installed inside the Navigator, all of the Playback Only functions
can be accessed by sending MIDI notes to the Navigator. Please see the Navigator MIDI interface
supplement for more information.
Pre-programmed scenes and chases
When the Navigator is new there are some scenes and chases already programmed to get you started:
Scene and Chase page 1 is used for Discovery Scanners using fixtures 1 - 4
Scene and Chase page 2 is used for Defender Scanners using fixtures 5 - 8
Scene and Chase page 3 is used for TinyScan Plus scanners using fixtures 9 - 12
Please note: It is possible to overwrite this pre-stored information. If you do decide to do this there is
no way to get the information back.