Operating Instructions

4. Product Features

1. The ultrasonic sensor detection system consists of a master controller, extension controller, 12

ultrasonic sensors and accessories.

2. The entire system will work automatically when the reverse gear is engaged.

3. The on-screen display will provide real-time information to the vehicle driver about the danger

zones surrounding the vehicle.

5. Product Installation

Fig.1 installation instruction

 1st step

Install the sensors on a suitable place. The distance between sensor S6 / S7 and S1 / S12 must be

more than 1.5m, and other adjacent sensors should be installed more than 0.5m. Ideally the sensors

should be installed on the vehicle at roughly 0.6m to 0.8m above the ground.

 2nd step

Make sure the sensor is installed so that it is firm and steady.

Backup camera

Sensors

Control box

Monitor

Loudspeaker