Installation Manual

14
Monitor Operation
MENU
REV
V1/V2
▼
▼
POWER
ON / OFF
MENU/
SELECTION
BUTTON
CAMERA
SELECTION
DOWN
ARROW
UP
ARROW
ROTATE
IMAGE
(Back/Exit
when in
Menu Mode)
• volume P” and “DOWN” buttons.
REAR VIEW SAFETY
• Brightness, Contrast, Saturation, Sharpness: adjust image properties
• Picture Adjust: Stretch image horizontally (right/left and left/right)
• Turn: Toggle between mirror/normal image on each individual channel
• Day/Night: Toggle between back-lit buttons and auto dimming
• Name: Change name of each individual channel
• Trigger Source: Toggle channel destination for each trigger
• Trigger Delay: Adjust time delay on each trigger
• Distance Grid: Toggle which channel distance grid lines will display on
• Grid Position: Adjust grid lines
• Auto Power: On: Monitor will automatically turn on when powered. Off: Monitor will only turn on when
triggered. Auto: Monitor will follow previous state.
• Reset: Reset settings to factory default