Installation Manual
Table Of Contents
- Introduction
- SSV9 Kit Contents
- Making SSV9 Connections
- Recommended SSV9 Camera Locations and Settings
- SSV9 Electrical Tapping Points Reference Guide
- SSV9 System Configuration
- System Setup Menus
- SSV9 User Management
- System Information, Disk and File Management
- Playing Back Videos
RVS-96D Installation and Setup Guide
57
2.
3.
4.
The G-sensor menu enables you to specify accelerometer thresholds for the X, Y, and Z axes. These
are the thresholds at which the cameras will detect a sudden change in direction, which could be
caused by hard braking or impact from collision.
Make your choices from the menus, and then press .Save
To calibrate, TBD.
COPYRIGHT © 2017 Rear View Safety