Installation Manual
Table Of Contents
- Introduction
- SSV9 Kit Contents
- Making SSV9 Connections
- Recommended SSV9 Camera Locations and Settings
- SSV9 Electrical Tapping Points Reference Guide
- SSV9 System Configuration
- System Setup Menus
- SSV9 User Management
- System Information, Disk and File Management
- Playing Back Videos
RVS-96D Installation and Setup Guide
COPYRIGHT © 2017 Rear View Safety
51
6.
7.
1.
2.
1.
Alarm output.
Both options can be selected. I/O output can be used, for example, to send a signal to an
additional device such as a beeper.
Copying Your Alarm Settings to Other Channels
To copy your settings from one channel to one or more of the other ones:
Press the button. Copy
A dialog displays prompting you for target channel(s).
Select your target channels, and then press .Ok
Specifying Motion Detection Settings
From the System Settings menu, select Motion Detection.