Installation Manual
Table Of Contents
- Introduction
- SSV9 Kit Contents
- Making SSV9 Connections
- Recommended SSV9 Camera Locations and Settings
- SSV9 Electrical Tapping Points Reference Guide
- SSV9 System Configuration
- System Setup Menus
- SSV9 User Management
- System Information, Disk and File Management
- Playing Back Videos
RVS-96D Installation and Setup Guide
COPYRIGHT © 2017 Rear View Safety
50
1.
2.
3.
4.
5.
6.
After you select a channel from the menu, you can apply properties for that channel as described in
the following steps.
Enable Status: use the check box to enable and disable alarms.
Dev type: choose or from the menu.high level low level
Alarm triggers can be either high voltage (high level) or GROUND (low level).
Alarm Delay (seconds).
Alarm delay is the length of time the alarm channel displays in full-screen mode and with a
recorder.
Rec Channel.
Use the check boxes to specify which channels to record when an alarm occurs on the
specified input channel.
Periods of time.