Installation Manual
Table Of Contents
- Introduction
- SSV9 Kit Contents
- Making SSV9 Connections
- Recommended SSV9 Camera Locations and Settings
- SSV9 Electrical Tapping Points Reference Guide
- SSV9 System Configuration
- System Setup Menus
- SSV9 User Management
- System Information, Disk and File Management
- Playing Back Videos
RVS-96D Installation and Setup Guide
COPYRIGHT © 2017 Rear View Safety
42
2.
a.
b.
c.
i.
ii.
iii.
d.
i.
ii.
You can set the date and time:
Manually
Automatically
To set date and time manually:
Touch their respective fields to display the numeric keypad.
Use the keypad to specify new values; use the arrow keys to move the cursor
position forward and backward.
Select when done.Enter
To set date and time automatically using UTC time (Coordinated Universal Time,
formerly Greenwich Mean Time, or GMT) reported by the GPS:
Select the check box.GPS time adopt
The time on the device is coordinated with UTC time.
To display local time for your current time zone, you must use the plus or
minus check boxes and the hours/minutes numeric menu to specify the
deviation from UTC.
For Example