Instruction Manual

REAR VIEW SAFETY
8
Cable
1. Be sure to position the cable properly. The aviation camera
cable uses aircraft grade connectors which means the camera
cable can be exposed to all weather elements. Do not run the
cable over sharp edges, do not kink the cable and keep away
from HOT and rotating parts.
2. Fasten all cables and secure all excess cable.
Replacement Monitor
1. The Mirror Monitor replaces the existing rear view mirror in
vehicle.
2. Replace existing mirror, and adjust mounting angle to allow
optimum driver viewing comfort. (see figure 1.1 on page 11).
Clip-On Monitor
1. The Mirror Monitor attaches to the existing rear view mirror in
vehicle with the pressurized clips on the back of the monitor.
2. Attach monitor to existing miror, and adjust mounting angle to
allow optimum driver viewing comfort. (see figure 1.1 on page
12).
Installation Guide