Instruction Manual

- 24 -
1.2.1 CHANNELMODE
The 1.2.1 CHANNEL MODEscreen allows the selection of one of four camera groups to match the variety
of AHD, Analog and IP Cameras which may be connected to the MDVR Camera inputs.
The MDVR must be restarted each time a new combination of cameras is connected using these five steps:
CAMERA MIX
Determine the types of cameras connected to the MDVR
SELECT
Select (Blue highlight) the group of cameras matching the cameras connected
to the MDVR
CHECK BOX
Press ENTERto select the checked group
RESTART
Select SAVE, then press ENTER and THE SYSTEM WILL RESTART in
order to recognize the new camera mix
GO TO
AFTER THE MDVR RESTARTS go to the 1.3.5.1 IP CAMERA SETUP
screen
Select one of five options:
MIX OPTION 1
OnlyAHD Cameras may be connectedto Camera Input Channels 1, 2, 3, 4,5,6,7,8
MIX OPTION 2
Only ANALOG Cameras may be connectedto Camera Input Channels 1, 2, 3,
4,5,6,7,8
MIX OPTION 3
ANALOG Cameras may be connectedto Camera Input Channels 1, 2, 3,
4,5,6,7,8
IP Camera may be connected to the RJ45 Port
MIX OPTION 4
AHD Cameras may be connectedto Camera Input Channels 1, 2, 3, 4,5,6,7,8
IP Camera may be connected to the RJ45 Port
MIX OPTION 5
AHDCameras are limited to connection to Camera Input Channels 1,2,3,4
ANALOG Cameras are limited to connection to Camera Input Channels 5,6,7,8
SETUP MENU 1.2
'CHANNEL MODE'
CHANNEL MODE 1.2
CAMERA MODE 1.2.1
Mobilemule™