Installation Manual

- 56 -
1.8.2 SYSTEM INFO, PG 2
The1.8.2 SYSTEM INFOscreen shown above is Page 1 of 2 sequentialscreens displaying the current
MDVR system settings, operational status and business contact information.
To view the INFO screen:
INFO
Press to view PG 1 of the System Info screens.
RETURN
Press to return to the previous page
Note: For Status Report purposes only. No User entries.
MEDIA
Storage status for each of the installed recording media
COM 2 DEV
Serial Port 1 (Device Connected)
EXT TEMP 1
External Temperature Sensor 1 reading (requires optional sensor)
2
External Temperature Sensor 2 reading (requires optional sensor)
MILEAGE
Approximate distance Vehicle has traveled since last odometer setting
DNS
Domain IP of 3G/4G
MCU COM
Serial Port 1 (Device Connected)
VOLTAGE IN
Voltage supplied by vehicle to MDVR
AD 1
Sensor Out (SENS OUT 1) status
AD 2
Sensor Out (SENS OUT 2) status
G SENSOR X
Accelerometer X Axis reading
Y
Accelerometer Y Axis reading
Z
Accelerometer Z Axis reading
USER NOTES AND FEEDBACK
SETUP MENU 1.8
'SYSTEM INFO'
SYSTEM INFO PG
1 'NEXT'
SYSTEM INFO
PG 2 'NEXT'
Mobilemule™