Installation Manual

Rear View Safety

MONITOR OPERATION

• "Brightness" "Contrast "Saturation" "Sharpness": adjust image properties

• Picture Adjust: Stretch image horizontally (right/left and left/right)

• Turn: Toggle between mirror/normal image on each individual channel

• Day/Night: Toggle between back-lit buttons and auto dimming

• Name: Change name of each individual channel

• Trigger Source: Toggle channel destination for each trigger

• Trigger Delay: Adjust time delay on each trigger

• Distance Grid: Toggle which channel distance grid lines will display on

• Grid Position: Adjust grid lines

• Auto Power: On: Monitor will automatically turn on when powered.

O: Monitor will only turn on when triggered. Auto: Monitor will follow previous state.

• Reset: Reset settings to factory default

Camera selection

Power

Toggle selection

down

Rotate Image