Instruction Manual

- 61 -
1.8.2 SYSTEM INFO, PG 2 OF 3
The1.8.2 SYSTEM INFO screen shown above is Page 2 of 3 sequential screens displaying the current
MDVR system settings, operational status and business contact information.
To view the INFO screen:
INFO
Press to view PG 1 of the System Info screens.
NEXT
Select and press ENTER to view 1.8.3 SYSTEM INFO PG 3
RETURN
Press to return to the previous page
Note: For Status Report purposes only. No User entries.
MEDIA
Storage status for each of the installed recording media
HDD1 SERIAL
Serial number of the hard disk 1
HDD2 SERIAL
Serial number of the hard disk 2
COM 1 DEV
Serial Port 1 (Device Connected)
COM 2 DEV
Serial Port 1 (Device Connected)
POWER VOL
Voltage supplied by vehicle to MDVR
BATTERY VOL
Backup battery input voltage
MCU COM
Serial Port MCU (Device Connected)
G SENSOR X
Accelerometer X Axis reading
Y
Accelerometer Y Axis reading
Z
Accelerometer Z Axis reading
ACC STATE
ACC State(ON OR OFF)
MASTER MENU
1.8 'SYSTEM INFO'
SYSTEM INFO PG
1 'NEXT'
SYSTEM INFO
PG 2 'NEXT'
INFO
PG 3
Mobilemule™