Instruction Manual

- 60 -
1.8.1 SYSTEM INFO, PG 1 OF 3
The 1.8.1 SYSTEM INFO screen is one of three sequential screens to display the current MDVR system
settings, real time operational status and optional business contact information. A compatible monitor must
be properly connected and configured to either of the MDVR Rear or Front Monitor ports.
INFO
Press to view PG 1 of the System Info screens.
NEXT
Select and press ENTER to view 1.8.2 SYSTEM INFO PG 2
RETURN
Press to return to the previous page
Note: For Status Report purposes only. No User entry
SW
Software Version
HW
Hardware Version
SN
Serial Number
MCU
Micro Control Unit
IMEI
The ID of the MDVR Cellular Modem Option when installed and enabled within the
MDVR for communication with the CMS Server. It is automatically displayed if an
active SIM Card is installed.
DISK TEMP
Internal Temperature reading of DISK
SPEED
Vehicle Speed (should read ‘0’ if the vehicle is properly parked)
GPS-M
GPS optioninstalled?
MILEAGE
Approximate distance Vehicle has traveled since last odometer setting
4G-M
Cellular Option installed?
SIM CARD
SIM Card installed?
WIFI-M
WIFI Option installed?
CMS
Central Monitoring Station Linked?
EXT-TEMP
External Temperature reading (Option)
PULSE
Optional. Requires SPEEDOMETER MODULE
GPS LONG
Current GPS Longitude reading
GPS LAT
Current GPS Latitude reading
4G-STATUS
Cellular Status
4G-SIGNAL
SIM Signal reading
WIFI-
SIGNAL
WIFI Signal reading
DNS
Domain IP of 3G/4G
WIFI LINK
WIFI Station Linked?
MASTER MENU 1.8
'SYSTEM INFO'
SYSTEM INFO 1.8.1
SYSTEM INFO PG 2
'NEXT'
Mobilemule™