Instruction Manual

- 45 -
1.5.1.1 CONFIGURATION
The 1.5.1.1 CONFIGURATION screen allows the user to copy the basic system settings from one MDVR
and transfer (Export) them to another MDVR using an SD card.
EXPORT CONFIG FILE
Select to copy this MDVRs system settings to an SD Card for use as
backup or to easily setup another MDVR:
1. Place blank, formatted SD Card in SD Slot 1
2. Select EXPORT CONFIG FILE button
3. Remove SD Card from Slot 1
IMPORT CONFIG FILE
Use to copy the above MDVRs system settings to the one to be
programmed.
1. Ensure MDVR is powered Off and in UNLOCK position
2. Insert SD Card containing the EXPORT CONFIG FILE in SD Slot 1
3. Close the Security Door and turn Key to the 'LOCK’ position
4. MDVR will start up and automatically copy the settings on the SD
Card and complete the startup process
5. When the Camera Screen appears Turn Key to ‘UNLOCK’ position
6. Open Security Door; remove the SIM Remove SD Card from Slot 1
RESET TO DEFAULT
Resets MDVR to the original factory settings and permanently deletes any
other settings. The SYSTEM will prompt you to reconfirm prior to
completing the reset to original settings
CHANGE LOGO
Add or upgrade a logo to be displayed on the MDVRs LCD Monitor during
the start up process
MASTER MENU 1.5
'TOOLS'
TOOLS 1.5.1
'CONFIGURE'
CONFIGURE 1.5.1.1
'CONFIGURATION'
Mobilemule™