Instruction Manual

- 17 -
1.1.2.1 VEHICLE SETUP
The 1.1.2.1VEHICLE SETUP screen is used to enter data and enable functions related to the company,
vehicle, driver, mobile phone number and power related operation. The DEVICE NUMBER is the only field
required to have data entered.
DEVICE SERIAL ID
Unique number assigned by factory.
DEVICE NUMBER
Unique number (Up to 7digits) to display on Video Display, be recorded
with the Video files and ID the Vehicle to CMS
COMPANY NAME
Enter company name (Up to 19 characters)
DRIVER NAME
Drivers name or ID (Up to 19 characters)
SIM NUMBER
Phone number for the MDVR contained SIM Card if installed
ACCRUAL
Select from two ODOMETER options:
ON Odometer will add (accrue) distance traveled based on GPS
OFF Function disabled
ODOMETER
Enter starting mileage or kilometers if ACCRUAL function is ‘ON’
LICENSE PLATE
Enter License Plate characters (Up to 8 characters)
POWER MODE
Select from two options:
TIMER MDVR power will turn ‘Off ‘ and ‘On’ at preselected times.
IGNITION MDVR power will be controlled by the Ignition
Switch (Select the ignition, there is a delay shutdown
function)
POWER ON
Enter time to start MDVR. Note: TIMER Mode must be selected.
POWER OFF
Enter time to end MDVR. Note: TIMER Mode must be selected.
LOW POWER OFF
Enter the voltage level to turn Off the MDVR to prevent further drain on the
vehicle battery when it is low
Action Bar Keys (Select, then press ENTER):
CHANGE ODOMETER
To enter new distance related numbers into the ODOMETER field
SAVE
To save the new settings 1.1.2.1 VEHICLE SETUP screen will remain
showing
MASTER MENU 1.1
'BASIC'
BASIC MENU 1.1.2
'VEHICLE'
VEHICLE SETUP
1.1.2.1
Mobilemule™