Instruction Manual

- 40 -

1.4.5.1 ALARM OUT SETUP

The 1.4.5.1 ALARM OUT SETUP screen defines the Input – Trigger – Response relationships with the

various sensors and reporting devices connected to the MDVR. The ALARM OUT SETUP screen adds the

ability to add ALARM and ALARM logging responses to the other criteria set within the individual Sensor

and Device screens.

ALM SOURCE

The input to trigger the ALM (Alarm) Output

ALM OUTPUT

The output path to a Sensor Output

LOG

Select whether the detected Alarm is also logged as an ALARM

Select one of 8 Sensor Inputs (IO1-8)

DISK TEMP

Hard disk temperature alarm.

SPEED

Monitors High and Low speed settings in 1.4.2.1 SPEED SETTINGS

G -SENSOR

Monitors X, Y, Z settings in 1.4.3.1 G SENSOR SETUP

VIDEO LOSS

Monitors Video Loss (Camera malfunction)

MOTION

Monitors movement or light changes sensed by the 1.4.6.1 MOTION DETECTION

SETUP

HW ERROR

Monitors factory set criteria for the detection of hardware level errors

GPS ERROR

Monitors factory set criteria for the detection of GPS Module signal reception errors

Action Bar Keys (Select, then press ENTER):

SUMMARY

To move to the 1.4.5.1.1 ALARM OUT SUMMARY PAGE to view a list of the

Input – Trigger – Response relationships currently setup

SAVE

To save and activate the new settings

MASTER MENU 1.4

''BASIC'

BASIC MENU 1.4.5

'ALARMS'

ALARM SETUP

1.4.5.1

'ALARM OUT'

Mobilemule™