Instruction Manual

- 38 -
1.4.4.1 TEMPERATURE SETTINGS
The 1.4.4.1TEMPERATURE SENSOR SETUP screen allows the User to trigger the MDVRs Recording
Mode based on low and high temperature thresholds determined by temperature settings entered. Either or
both High and Low settings may be entered independently.
TEMP-DEV
Select the Sensor used as the temperature reporting source:
MDVR MDVR internal temperature (Standard)
DISK DISK temperature (Standard)
TEMP EXT (1 – 4 ) External temperature sensors, up to 4 (Optional)
UNIT
Select the unit of temperature measurement:
F Fahrenheit
C Celsius
RANGE
There are two settings (each optional) to create the upper and lower temperature range:
LOW Low temperature setting row
HIGH High temperature setting row
ENABLE
Select the operational status of this function:
ON The selected functions are ‘On’
OFF The selected functions are ‘Off’
TRIGGER
Enter the Temperature limits and select + or – indicators as needed:
LOW The Low temperature to trigger a response
HIGH The high temperature to trigger a response
TYPE
Select one of two options:
ALARM Event will be, recorded, logged and searchable as an ALARM
SYSTEM Event will be, recorded, logged and searchable as SYSTEM
Action Bar Keys (Select, then press ENTER):
SUMMARY
To move to the 1.4.4.1.1 TEMPERATURE SUMMARY PAGE
SAVE
To save and activate the new settings
MASTER MENU
1.4 'ALARMS'
ALARMS 1.4.4
'TEMPERATURE'
TEMPERATURE
1.4.4.1
Mobilemule™