Instruction Manual

- 34 -
1.4.1.1 SENSOR INPUT AND OUTPUT
The 1.4.1.1 SENSOR SETUP screen defines the trigger response relationship between each of the 8 Sensor
In (Inputs) and actions available
SENSOR IN
Define the trigger response relationship for each of the 8 SENSOR IN (Input)
NAME
Name of SENSOR IN device (8 Characters)
LINK TO
Enter Camera channel (CH) to switch to full screen and display video when
assigned SENSOR IN is triggered
ENABLE
Select from two options:
ON The selected functions are ‘On’
OFF The selected functions are ‘Off’
V LEVEL
HIGH Detect when Voltage is ‘On’
LOW Detect when Voltage is ‘Off’
TYPE
Select type of response is to be sent when the V LEVEL SETTING is matched:
ALARM Triggers a response sent to one of the two SENSOR OUT ports
SYSTEM Triggers an entry into the SYSTEM and/or ALARM/EVENT LOG
OUT DELAY
Select the time delay in seconds for alarm out
SNAPSHOT
Takes a single picture
TO SERVER
Select from two options:
ON Automatically upload the Snapshot to the IVMS
OFF DO NOT Automatically upload the Snapshot to the IVMS
Action Bar Keys (Select, then press ENTER):
SUMMARY
To move to 1.4.1.1.1 SENSOR SETUP SUMMARY PAGE to provide a list of
the current Sensor In (SENS IN) and Output relationships
SAVE
To save and activate the new settings
MASTER MENU 1.4
'ALARMS'
ALARM SETUP 1.4.1
'SENSORS'
SENSOR SETUP
1.4.1.1
Mobilemule™