Instruction Manual

- 23 -
1.1.5.1 DISPLAY SETUP (PG 1 OF 2)
The 1.1.5.1 DISPLAY SETUP screen allows the selection of video input (Cameras) and video output
(Monitor). If the wrong type is selected for the Camera or Monitor, a horizontal ‘rolling effect’ may be seen.
The VIEW function allows the use of a ‘hidden camera’ whereby its output may be recorded on the MDVR
and viewed remotely via the CMS but not displayed on the local Monitor.
VIDEO IN TYPE
Select one of two options to match the Camera Type connected to the MDVR:
NTSC USA Video standard
PAL Europe, China, etc.
VIDEO OUT TYPE
Select one of two options to match the Monitor Type connected to the MDVR:
NTSC USA Video standard
PAL Europe, China, etc.
PRVIEW
Allows use of camera without it being displayed in real time on the monitor.
Select one of two options:
ON The camera view will be displayed
OFF The camera view will NOT be displayed
PRVIEW CH
Select the channel which will NOT be displayed on the local Monitor
Action Bar Keys (Select, then press ENTER):
NEXT
To move to the 1.1.5.2 DISPLAY SETUP screen
SAVE
To save and activate the new settings
MASTER MENU 1.1
'BASIC'
BASIC MENU 1.1.5
'DISPLAY'
DISPLAY SETUP 1.1.5.1
Mobilemule™