Instruction Manual

- 22 -
1.1.4.1 NETWORK SETUP
The 1.1.4.1NETWORK SETUP function enables the User to setup a WIFI based, full duplex (bi-
directional), communication between the MDVR and the Central Monitoring Service (IVMS) (optional) for
real time, remote monitoring, setup, speed, etc. To utilize these functions, a compatible Internal or External
WIFI Modem must be connected and enabled. The Internal Modem must be ordered and installed by the
factory. The External Modem is available as an option. Contact your IVMS SysOp(IT) for the data to enter
below.
IP ADDRESS
Enter in standard format (000.000.000.000)
NETMASK
Enter in standard format (000.000.000.000)
GATEWAY
Enter in standard format (000.000.000.000)
MAC ADDRESS
The Modem will display the MDVRs MAC Address. It can be User edited
NET MODE
Select one of two options:
DOMAIN When selected, the DOMAIN and DNS Fields will appear
IP When selected, the SERVER IP Field will appear
DOMAIN NAME
(30 Characters)Appears only when DOMAIN is selected in the above field
DNS
Appears only when DOMAIN is selected in the NET MODE field
SERVER ADDRESS
Appears only when IP is selected in the NET MODE field
CONTROL PORT
(6 digits) Contact CMS SysOp for this field entry
INTERCOM IP
Contact CMS SysOp for this field entry. This feature requires the INTERCOM
Kit (Optional)
INTERCOM PORT
(6 digits)Contact CMS SysOp for this field entry. This feature requires the
INTERCOM Kit (Optional)
Action Bar Keys (Select, then press ENTER):
SAVE
To save and activate the new settings
MASTER MENU 1.1 '
'BASIC'
BASIC MENU 1.1.4
'NETWORK'
NETWORK SETUP
1.1.4.1
Mobilemule™